T12烙鐵頭簡介

T12烙鐵頭,是日本白光公司推出的FX-951拆消靜電電焊臺標配的烙鐵頭型號名稱。

T12烙鐵頭屬複合型焊咀,是發熱芯、溫度感測器、烙鐵頭三個部件的複合體,又稱T12焊咀。

T12烙鐵頭的特點是：感測器充分前置,對溫度變化敏感度高。

 

T12烙鐵頭基本性能及特點

1.適用於白光FX-950／FX-951／FX-952電焊臺；

2.無鉛、環保、符合ROSH標準、有SGS報告； 

3.使用溫度在400度（正負20度）能達到40000焊點；

4.上下錫流暢；

5.複合式焊咀與發熱芯二合一設計，夠快夠熱，無論焊點大小或無鉛焊接，均能應付自如。 

 

T12烙鐵頭常規型號

T12-B,T12-B2,T12-B3,T12-B4,T12-BC1,T12-BC2,T12-BC2Z,T12-BC3,T12-BC3Z,T12-BCF1,T12-BCF1Z,T12-BCF2,T12-BCF2Z,T12-BCF3,T12-BCF3Z,T12-BL,T12-BZ,T12-C1,T12- ,T12-C4Z,T12-CF4,T12-CF4Z,T12-D4,T12-D08,T12-D12,T12-D16,T12-D24,T12-D52,T12-DL08,T12-DL12,T12-DL32,T12-DL52,T12-I,T12-IL,T12-ILS,T12-J02,T12-JL02,T12-JS02,T12-K,T12-KF,T12-KL,T12-KR,T12-KU

 

各規格型號烙鐵頭應用範圍

B型（圓錐型/尖咀）

特    點： B型烙鐵頭無方向性，整個烙鐵頭前端均可進行焊接。

應用範圍： 適合一般焊接，無論大小之焊點，也可使用B型烙鐵頭。

 

K型 （刀頭）

特    點：使用刀形部份焊接，豎立式或拉焊式焊接均可，屬於多用途烙鐵頭。

應用範圍： 適用於SOJ, PLCC, SOP, QFP，電源,接地部份元件，修正錫橋，連接器等焊接。

 

I型（尖咀）

特    點：烙鐵頭 幼細。

應用範圍： 適合精細之焊接，或焊接空間狹小之情況，也可以修正焊接晶片時產生之錫橋。

 

D型（平頭/一字批咀型）

扁型包括D08,D12,D16,D24,DL32,D4,D52等

特    點：用批咀部份進行焊接。

應用範圍：適合需要多錫量之焊接，例如焊接面積大、粗端子、焊墊大的焊接環境。

 

BC型（馬蹄型/斜切圓柱型）

馬蹄型包括C1、BC1、BC2、BC3、 等

特    點： 用烙鐵頭前端斜面部份進行焊接，適合需要多錫量之焊接。

應用範圍： Ｃ型烙鐵頭應用範圍與D型烙鐵頭相似，例如焊接面積大，粗端子，焊墊大的情況適用。

BC1,C1等烙鐵頭非常精細，適用於焊接細小元件，或修正表面焊接時產生之錫橋，錫柱等。如果焊接只需少量焊錫的話，使用只在斜面有鍍錫的CF 型烙鐵頭比較適合。

BC2,BC3型烙鐵頭，適合焊接電阻，二極體之類的元件，齒距較大之SOP 及QFP 也可以使用。

,C5適用於粗大之端子，電路板上之接地。電源部份等需要較大熱量之焊接場合。

 

Brief introduction of T12 soldering iron head

T12 soldering iron head is the model and name of the soldering iron head which is standard equipment of fx-951 electrostatic removing welding platform launched by Japan HAKKO company.

 

T12 tip is a composite tip, which is a combination of heating core, temperature sensor and tip, also called T12 tip.

 

The characteristic of T12 soldering iron head is that the sensor is fully pre positioned and highly sensitive to temperature change.

 

Basic properties and characteristics of T12 iron head

-950 / fx-951 / fx-952 welding platform;

, environmental friendly, Roh compliant, with SGS report

3. 40000 solder joints can be achieved at 400 ℃ (plus or minus 20 ℃);

;

, fast and hot enough, and can handle the welding freely no matter the size of welding spot or lead-free welding.  

 General model of T12 soldering iron head

T12-B,T12-B2,T12-B3,T12-B4,T12-BC1,T12-BC2,T12-BC2Z,T12-BC3,T12-BC3Z,T12-BCF1,T12-BCF1Z,T12-BCF2,T12-BCF2Z,T12-BCF3,T12-BCF3Z,T12-BL,T12-BZ,T12-C1,T12- ,T12-C4Z,T12-CF4,T12-CF4Z,T12-D4,T12-D08,T12-D12,T12-D16,T12-D24,T12-D52,T12-DL08,T12-DL12,T12-DL32,T12-DL52,T12-I,T12-IL,T12-ILS,T12-J02,T12-JL02,T12-JS02,T12-K,T12-KF,T12-KL,T12-KR,T12-KU

 

Application scope of soldering iron head of various specifications and models

 

Type B (cone / tip)

Special point: B-type iron head has no directionality, and the front end of the whole iron head can be welded.

Scope of application: suitable for general welding, regardless of the size of the solder joints, can also use B-type iron head.

 

Type K (cutter head)

Special point: it can be welded by knife shaped part,-purpose soldering iron head.

 

Application: suitable for welding SOJ, PLCC, SOP, QFP, power supply, grounding parts, modified tin bridge, connector, etc.

 

 

Type I (tip)

Special point: the tip of the iron head is fine.

Application scope:.

 

Type D (flat / slotted)

Flat type includes D08, D12, D16, D24, DL32, D4, D52, etc

Special point: use the nozzle part for welding.

Scope of application: suitable for welding requiring more tin, such as welding environment with large welding area, thick terminal and large welding pad.

 

Type BC (horseshoe / chamfered cylinder)

Horseshoe type includes C1, BC1, BC2, BC3, , etc

Special point: use the bevel part of the front end of the iron head for welding, which is suitable for welding with more tin.

Application scope: the application scope of type C soldering iron head is similar to that of

type D soldering iron head, for example, the case of large welding area, thick terminal and large welding pad is applicable.

BC1, C1 and other soldering iron heads are very fine, which are suitable for welding small components,, it is suitable to use CF type iron head with tin plating only on the bevel.

 

BC2, BC3 soldering iron head, suitable for welding resistor, diode and other components, SOP and QFP with large pitch can also be used.

.

　　T12-B　T12-B2　T12-B3　T12-B4　T12-BL　T12-BC1　T12-BCF1　T12-BC2　T12-BCF2　T12-B3　T12-BCF3　T12-C1　T12- 　T12-CF4　T12-D08　T12-D12　T12-D16　T12-D24　T12-D4　T12-D52　T12-DL08　T12-DL12　T12-DL32　T12-DL52　T12-I　T12-IL　T12-ILS　T12-J02　T12-JL02　T12-JS02　T12-K　T12-KF　T12-KL　T12-KR　T12-KU　T12-1201　T12-1202　T12-1203　T12-1204　T12-1205　T12-1206　T12-1207　T12-1208　T12-1209　T12-1001　T12-1002　T12-1003　T12-1004　T12-1005　T12-1006　T12-1007　T12-1008　T12-1009　T12-1010　T12-1401　T12-1402　T12-1403　T12-1404　T12-1405　T12-1406　T12-BZ　T12-B2Z　T12-BC1Z　T12-BCF1Z　T12-T12-BC2Z　T12-BCM2　T12-BC3Z　T12-BCF3Z　T12-BCM3　T12-C4Z　T12-CF4Z　T12-D12Z　T12-D16Z　T12-D24Z　T12-D4Z　T12-KFZ　T12-KRZ　T12-WB2　T12WD08　T12-WD12　T12-WD16　T12-WD52　T12-WI 　　 　　適用於HAKKO942，FX-951，FX-952等無鉛焊鐵，功率可達70W，發熱夠快，連同其他的共有84款焊咀，能應付各種焊接工作。