電鍍表面油墨銷售廠家！

主要用於電鍍表面、強化表面、真空電鍍表面．PU表面．UV表面等材料上，具有高色澤、高色彩、高遮蓋力、高穩定性、耐酒精及耐磨擦之特點。 
印刷：絲印移印均可。
表幹及實干時間：表干時間自然揮發5-10分鐘；實干時間在24小時以內。

稀釋及清洗：SV3慢幹開油水、UVK1（移印開油水）同時可使用718洗網水清洗。

測試方法（完全乾燥後）：
1、3m膠紙粘在畫有百格的油墨表面，45度角迅速拉起不脫油; 
2、純度99%的工業酒精，一千克砝碼用棉布包住在油墨表面，以水準力來回拉200次無脫色; 
3、 耐磨：橡皮擦500g力水準來回擦500次。 
使用方法：
1、使用前應充分攪拌，用後隨時封閉； 
2、攪拌時加開油水10-15%，稀釋到印刷粘度； 
3、網板塞網時可用洗網水清洗；
4、不得與其他類型油墨混合使用。
注意事項： 
1、塑膠材料的外觀相似，但可能會是不同的材料，客戶需試印確定其符合要求後，再批量印刷； 
2、在移印過程中，如出現拉絲或散開，可適當加入一些慢幹膏即可; 
3、環境溫度過高，將會影響油墨原有質量； 
4、根據氣候變化，請遠離火源，陰暗環境下存放。 

MPE plating strengthening series ink characteristics : mainly used in plating surface, enhanced surface,, with a high color, high color, high covering power, high stability,:: surface dry time natural volatile 5-10 minutes;: SV3 slow dry open water, UVK1 ( printing open water)( completely dry ): 1, 3M gummed paper in the paintings of the surface of the ink, 45 degree angle quickly pulled off the oil; 2, 99% of the purity of industrial alcohol, one kilogram of weight of cotton pack in the ink surface, with a horizontal force pulling back and forth 200 times without decolorization; 3: oak,: 1, use should be fully stirred, use at any time after the closure; 2, add water mixing 10-15%, diluted to 3, screen printing viscosity; the plug is available when washing network water cleaning; 4,: 1, the plastic material similar in appearance, but may be of different materials, customers need to try to determine its requirements, and then batch printing; 2, in the printing process, such as drawing or spread out, may be appropriate to add some slow dry plaster; 3, the ambient temperature is too high, will affect the quality of the original ink; 4, according to climate change, please stay away from fire, dark environment storage.