優採

深圳市創遙科技有限公司

身份認證

深圳市創遙科技有限公司是無線遙控器,無線接收模組,無線控制器的優良生產製造廠家,竭誠爲您提供全新的新款安防大功率433學習碼對拷碼無線遙控器,汽車排氣管改裝無線遙控器/汽車配件433無線遙控器,多種頻率可拷貝無線遙控器/各種品牌專用拷貝遙控器等系列產品。

深圳市創遙科技有限公司

手機訪問展示廳

首頁 > 產品目錄 > 電工電氣 > 遙控器及配件 > 按鍵式遙控器 > 手機APP遠程wifi操控捲簾門/電動門控制器

聯繫資訊

  •   先生 
  • 電話: 點此查看
  • 地址: 廣東省 深圳市   龍崗區 布吉街道布瀾路口聯創科技園2期27棟
  • 發聯繫信
好用又免費的採購管理軟體

手機APP遠程wifi操控捲簾門/電動門控制器
手機APP遠程wifi操控捲簾門/電動門控制器

手機查看產品資訊

訂貨量(件) 價格(元/件)
100-499 140.00
500-999 135.00
≥1000 130.00
供貨總量: 100000件
產地: 廣東省/深圳市
發貨期: 自買家付款之日起10天內發貨
數量:
分享到
手機APP遠程wifi操控捲簾門/電動門控制器 掃碼發送給微信好友

“手機APP遠程wifi操控捲簾門/電動門控制器”參數說明

是否有現貨: 認證: CE ROHS ISO9001
應用行業: 自動門 信號傳遞方式: 網路
品牌: YET 型號: YET866wifi
規格: YET866wifi 商標: YET(遙爾泰)
包裝: 紙箱 工作電壓: 220V
頻率: 433mhz 尺寸: 123mm*77mm*38.7mm
產量: 100000

“手機APP遠程wifi操控捲簾門/電動門控制器”詳細介紹

手機APP遠程wifi操控捲簾門/電動門控制器基本介紹

I、概述Summarize

     YET866PC-wifi是一款集遙控控制(433)、wifi手機端控製爲一體的卷閘門控制器。具有設置行程(15-255秒之間)、自動關門(延時關門時間可調0-65535秒之間)、遇阻反彈(迴轉3S並停止)等功能。廣泛應用於車庫門、超市等場所

YET866PC -Wifi is a Roller shutter receiver with RF & wifi App Technology and which with the function of running time setting  (from15 to 255sec), auto-door (Delayed closing time from 0 to 65535 sec), resistance rebound (turing 3S with stopping)etc., it is widely used in garage doors, supermarkets and others.

 

1. 1功能特點

  1. RF(433M)WIFI雙系統

RF (433MHz)and WIFI  two system

  1. 自動關門功能:延時時間可調

Auto-close: Auto close delay time setting

  1. 遇阻反彈:遇阻自動停止,並迴轉3

resistance rebound: Encounter resistance stopping, and turn back in 3s.

  1. 自動測算行程:行程時間15-255

Automatically detect journey : the running time 15-255S.

  1. 設置:可使用遙控器或APP設置行程、延時時間、學習遙控器

Setting:  RF remote control or WIFI  APP both available to set running time, auto-close delay time and Learning/pair remote control

 

1. 2 技術參數 Technology Parameter

  1.  輸入電壓Input Voltage AC220V
  2.  靜態功耗Static power consumption <1W
  3.  額定電流Rated Current<10A
  4.  應用電機參數Applied motor parameters 單相交流非同步電機AC220V  <1KW
  5.  尺寸Dimensions120*80*35MM
  6.  工作溫度Working temperature -2550℃

 

3.1遙控學習  Remote control learning :

注: 本控制器*多可以學習10個遙控器,學習第11個時第1個自動 作廢。

Noted: The controller memory is 10pcs remote control, ,the initial remote contol code will be scrapping automatically if you insist on learning 11th it.

方法1:按下控制板學習按鈕”1S,此時綠色指示燈亮,長按遙控器任意鍵,綠色指示燈閃爍4次表示學成功。

Method 1: Press “ Learn button” for 1S on board, at this time, the green indicator lighting on,and long hold on remote control for any key, the “green LED” flashes fourth, it is means learning successes.

方法2:同時按下已經學習的遙控器的停止+鎖定組合鍵,綠色指示燈亮,再按下需要學習的遙控的任意鍵,此時綠色指示燈閃爍4次。表示學習成功。

Method 2: Press the "stop” + “lock" same time,in which have been learned., the green LED lighting on . Press any key for learned code in remote control,at this time, the green LED flashes fourth, it is means learning code successfully.

3.2 清碼 Code Clear

長按學習按鈕”10S左右,直到綠色指示燈滅表示清碼成功。

Long Press the learn button 10S, In which is not success until the "green LED"gone off

 

3.3 設置自動關門時間 Auto-close Delay Time Setting

   方法1 按下控制板上設置自動關門時間按鈕1S,此時綠色指示燈出現1S閃爍一次表示開始計時,計時時間到後,按下已經學習的遙控的任意鍵停止計時。綠色指示燈常亮,表示設置成功。

Method 1: Press “Setting self-closing door  time” for 1S on board, at this moment ,the green LED will flash once 1S, it means start counting. When timekeeping to up, press any key with learned code remote control to stop. the green LED is lighting on , it indicate the setting is successes.

   方法2:同時按下已經學習的遙控器的+鎖定組合鍵,待綠色指示燈出現1S閃爍一次表示開始計時,計時時間到後,按下已經學習的遙控的任意鍵停止計時。綠色指示燈常亮,表示設置成功。

Method 2 :Press button"open” + “lock"  same time, in which learned code,waiting the “green LED” flash once 1S, it means the start counting. When timekeeping to up, press any key with learned code remote control to stop. the green indicator lighting on, it indicate the setting is successes

 

3.4 設置行程 Running time Setting(即 that is to say:操作一次運行的時間 let the rolling work from open to close

   方法1:按下控制板設置行程按鈕,此時綠色指示燈亮,電機也開始啓動(如沒有  接電機,可以聽到繼電器開關2次的聲音)。當行程時間到後,按下已經學習的遙控的任意鍵,電機停止工作,設置行程完畢。

Method 1: Pressing setting the distance on board, the green indicator lighting on,at that time motor starts working (If no motor, you can hear the twice voice on relay switch). When finish distance, press any key remote control button that have been learned code,the motor stops working, and setting complete.

  方法2:同時按下已經學習的遙控器的+鎖定組合鍵,此時綠色指示燈亮,電機也啓動(如沒有接電機,可以聽到繼電器開關2次的聲音),當行程時間到後,按下已學習遙控任意鍵,電機停止工作,設置行程完畢。(注:時間應在15-255之間,否則設置無效)

Method 2: Press the "open + “lock"button which have been learning code, the green indicator lighting on, and the motor starts working (If no motor, you can hear the twice voice on relay switch). When finish, press any key button remote control which learned code, the motor stop to working and setting completed. (Remark: the time must be 15-255S, others is invalid.)

 

IVAPP使用說明APP Function

  4.1  APP軟體下載和安裝: APP(application)  download and installation

  • Android系統:
  1. 國內用戶:用戶可以通過豌豆夾平臺或應用商店_360手機助手平臺搜索關鍵詞:遙爾泰“Safemate”,下載**版本的“safemate.apk”軟體,按提示完成APP軟體的安裝;
  2. 國外用戶:用戶可以通過“Google Play”平臺搜索關鍵詞:遙爾泰“Safemate”,下載**版本的“safemate.apk”軟體,按提示完成APP軟體的安裝;

Foreign users: users can search through the "Google Play" platform to search for keywords: "YET" and "Safemate", download the latest version of "safemate.apk" software, and press the instructions to complete the installation of the APP;

  • iOS系統:國內外用戶可以通過“App Store”平臺搜索關鍵詞:遙爾泰“Safemate”,下載**版本的“Safemate”軟體,按提示完成APP軟體的安裝。

iOS systemUsers at home and abroad can search through the "App Store" platform to search for keywords: "YET", "Safemate", download the latest version of "Safemate" software, and press the instructions to complete the installation of the App