有客戶上來就問你們廠生產的複合機多少錢一臺？
這讓我如何回答你，起碼告訴我你是複合什麼材料，用什麼膠水，門幅多寬，需要哪些配置。
這樣我才能 纔能知道你需要哪種複合機，哪些配置適合你！我才能 纔能給你報價啊，才精準~

溫馨提示：

由於市場價格浮動影響，以上產品價格、屬性僅供參考，詳情以來電諮詢爲準，真誠期待與您的合作，也希望能把我們好的 ，好的產品傳遞給您！！

我們每款機器出廠前必須要經過您的試樣才能 纔能夠出廠

我們的售後承諾：一年保修，終身維護，定期提示保養

24小時 熱線（微信）：13851340306（朱先生）

複合機就是將兩層或者兩層以上的材料用粘合劑粘合在一塊。如薄膜和布纖或者玻璃布就經常會用到。可和紙張，膠片、海綿、布料等複合。
用途與特點：
放料：採用磁粉張力、氣漲軸放卷 上膠：根據膠型不同，所選擇的機器上膠裝置也不同。油性膠用刮刀；油膠與水膠兩用型的，採用逗型刀
烘箱：長度根據產量大小而定。採用電加熱管加熱
傳動：採用調速電機
收卷：摩擦片收卷、磁粉張力氣漲軸中心收卷（可選）
組成部分：該機械是由放卷、上膠、烘箱、電加熱複合、切邊、遠紅外線、自動對邊、牽引、收卷。
用途：用於紡織品、無紡製品、針織面料、呢料、紡織面料等。
特性：採用膠點轉移技術，將膠水均勻地轉移到里布上，或薄膜上，然後與面布進行複合，複合的面料具有防水透溼功能。
變頻器：臺灣變頻器、電動功率3kw、複合輥筒是臺灣變頻器5.5kw、電加熱或油加熱複合輥筒，一般都是用電加熱（油加熱市場很少）。
複合輥筒：一般長度1.85米，直徑1.2米，1.5米的長是1.85米用於服裝面料，尺寸一般都可以，一般性的服裝細料都在1.6米以下，通常複合輥都要比面料寬於布料10公分左右，其他面料可能寬度大於2米以上，如裝飾材料、牀上用品、地毯等面料都是1.8-2.6米寬度，因此面料寬上膠輥就寬，複合也寬。
直徑是1.2米加熱輥，加熱管24根，每根1.5kw，共36kw，分3組裝置，每組12kw，也就是說用戶可以用36kw，3組全部打開只需要15分鍾，複合輥筒溫度150℃-180℃之間就可以複合布料，防水透氣膜複合溫度在150℃左右，如果用戶電不能使用36kw，那就打開1組，根據用戶電的情況來定，只要是直徑1.2米，長1.8-3米之間，電熱管數量都是24根36kw。
直徑是1.5米複合輥筒，加熱管30支，每支15kw，共45kw，同樣的輥筒長度1.8-2.6米之間，電熱管數量功率都不變。
複合滾筒壁厚1.2毫米，表面塗上美國度邦公司的 ， 保護複合布料，同時防止膠水，需要到上面輕輕一擦就乾淨，輥筒上配有4根橡膠輥、氣缸調節，自動分離。
在放料架上有對邊器，後進上膠輥，上膠輥直徑爲240毫米
主要技術參數： 
1    電源    380V 50HZ 3相
2    有效幅寬    2000mm根據材料幅寬選定
3    輥面幅寬    2200mm根據材料幅寬選定
4    加熱滾筒規格    ?1500、1800、2000mm
5    加熱方式    電加熱
6    塗布方式    膠點轉移塗布
7    機械設計速度    5-50m/min
8    整機功率    約60kw
9    外形尺寸（L*W*H）    約13000*2650*2200mm
10    毛重    約5500kg
 

, film, sponge, cloth and so on.
Use and characteristics:
Discharge material:,; double use of oil glue and water glue, use comma knife
Oven:
Drive: adopt the speed regulating motor
Reel: reel of frictional sheet, magnetic powder tension shaft center reel (optional)
Part: the machine is made up of coiling, gluing, oven and electric heating, cutting edge, far infrared, automatic edge, traction, and winding.
Usage: used for textiles, non-woven products, knitted fabric, woolen textile fabrics, etc..
Characteristics: the technology of glue dot transfer glue evenly transferred to the cloth, or the film, and then combined with the surface cloth composite fabric has the function of waterproof and moisture permeable.
Frequency converter: Taiwan inverter, electric power 3kw and compound roller are Taiwan frequency converter 5.5kW, electric heating or oil heating composite rollers, which are usually heated by electricity (oil heating market is very few).
Composite roller: length 1.85 meters, 1.2 meters in diameter, 1.5 meters long, 1.85 meters is used for apparel fabrics, clothing size can generally be fine of 1.6 meters in the following, usually composite roll than fabric cloth about 10 centimeters wide, other fabrics may width greater than 2 meters, such as decoration materials, bedding, carpets and other fabrics are 1.8-2.6 meters wide width, so the fabric on rollers is wide, the composite is also wide.
The diameter is 1.2 meters of heating roller, heating pipe 24, each 1.5KW, 36kw were divided into 3 groups, each group of 12KW devices, that is to say, the user can use the 36kw, the 3 groups all open only 15 minutes, between the composite roller temperature of 150 DEG -180 DEG can composite fabric, waterproof breathable membrane temperature in 150 DEG C, if the user cannot use electric 36kw, then open the 1 groups, according to the user the power to decide, as long as the diameter of 1.2 meters long, 1.8-3 meters, electric heating tube number is 24 36kw.
The diameter is 1.5 meters compound roller, heating pipe 30, each 15kw, a total of 45KW, the same roller length between 1.8-2.6 meters, electric heat pipe quantity and power are the same.
Composite cylinder wall thickness of 1.2 mm, coated on the surface of the state's composite cloth, protection, and prevent the glue, need to gently rub on the above clean roller is equipped with 4 root rubber roller, cylinder adjustment, automatic separation.
There is a side, back roller, and the diameter of the roller is 240 mm.
Main technical parameters:
1 power 380V 50HZ 3
2 2000mm according to the effective width of selected material width
3 2200mm roll width according to the width of the selected materials
4 heating drum size 1500, 1800, 2000mm?
5 electric heating heating method
6 coating glue point transfer coating
7 5-50m/min speed machine design
8 power about 60kW
9 size (L*W*H) about 13000*2650*2200mm
10 gross about 5500kg