國特GHG三筒烘乾機基本介紹

 三筒烘乾機設備可對幹混砂漿、黃沙、水泥廠礦渣、粘土、煤矸石、混合料、粉煤灰、石膏、鐵粉等原料的烘乾，廣泛用於建材、化工、鑄造等 行業。 三筒烘乾機改進原單筒烘乾機內部結構，增加入機前溼料的預烘乾和延長溼料在機內烘干時間，再加上密封、保溫以及合理的配套措施，使烘乾機生產能力與原單筒式烘乾機相比，提高48-80%，單位容積蒸發強度可達120-180kg/m3，標準煤耗僅爲6-8kg/t。其技術先進、運行參數合理，操作簡單可行。

Three-cylinder dryer equipment can dry dry mortar, yellow sand, cement slag, clay, gangue, mixture, fly ash, gypsum, iron powder and other raw materials, widely used in building materials, chemicals, castings,.The three-cylinder dryer improves the internal structure of the original single-barrel dryer, increases the pre-drying of the wet material before entering the machine and prolongs the drying time of the wet material in the machine, plus sealing,48-80%120-180kg/m3, standard coal consumption is only 6-8kg/ has advanced technology, reasonable operating parameters, simple and feasible operation.

國特GHG三筒烘乾機性能特點

1.三筒烘乾機設備投資是國外進口產品的1/6，採用合金鋼板製造，比普通鋼板耐磨3-4倍。

2.材質可按需求定製304、316不鏽鋼，超純生產，杜絕雜質污染。

3.三筒烘乾機熱效率高達80%，提高熱效率48%。

4.三筒烘乾機比單筒烘乾機減少佔地面積50%左右，土建投資降低50%左右。

5.燃料可適應煤、油、燃汽，能烘20-40mm以下的塊料、粒料、粉狀物料。

6.可根據用戶要求輕鬆調控所要的終水分指標。

7.該機採用物料與熱氣流順流烘乾工藝，適用範圍廣

1/6 of imported products, made of alloy steel plate, 3-4 times more wear than ordinary steel plate.

304, 316 stainless steel, ultra-pure production, eliminate impurity contamination.

-cylinder dryer is as high as 80%, and the thermal efficiency is increased by 48%.

-cylinder dryer reduces the floor space by about 50% compared to the single-cylinder dryer and reduces the civil engineering investment by about 50%.

, oil and gas, and can blocks, granules and powder materials below 20-40mm.

.

adopts a material and hot air flow drying process,with a wide range of applications

國特GHG三筒烘乾機技術參數

型號GHS163GHS214GHS265GHS306GHS348GHS368外筒直徑m1.62.12.633.43.6外筒長度m345688筒體容積m³5.312.624.536.964.381.4筒體轉速rpm8-108-108-108-108-108-10電機功率kw3*25.5*27.5*222*437*455*4機重t67.415.3324348石英砂初水分%15-1815-1815-1815-1815-1815-18石英砂初水分%222222石英砂初水分%8-108-108-108-108-108-10石英砂初水分%0.5-10.5-10.5-10.5-10.5-10.5-1 進氣溫度℃700-750℃700-750℃700-750℃700-750℃700-750℃700-750℃生產能力T/h4.5-7.510.6-17.820.6-34.731.1-52.254.1-9168.5-115

國特GHG三筒烘乾機使用說明

物料由供料裝置進入三筒烘乾機迴轉滾筒的內層，實現順流烘乾，物料在內層的抄板下不斷抄起、散落呈螺旋行進式實現熱交換，物料移動至內層的另一端進入中層，進行逆流烘乾，物料在中層不斷地被反覆 反復揚進，呈進兩步退一步的行進方式，物料在中層既充分吸收內層滾筒散發的熱量，又吸收中層滾筒的熱量，同時又延長了乾燥時間，物料在此達到 乾燥狀態。

The material is fed into the inner layer of the rotary drum of the three-cylinder dryer by the feeding device to achieve downstream drying.It n it  is moved to the other end of the inner layer and enters the middle layer, Step by step,The material in the middle layer not only fully absorbs the heat dissipated by the inner drum, but also absorbs the heat of the middle drum, and at the same time prolongs the drying time, and the material achieves the best dry state here.